Fix No Boot Device Found in Windows 10

Fix No Boot Device Found in Windows 10 – If you are looking for a solution to No boot device available in Windows 10 then this is the right platform where you can get the solution to overcome this problem. Fix No Boot Device Found in Windows 10Reading this tutorial will help you to find out its fixes easily. Do you know the actual meaning of bootable devices? If not, there is no worry as we are here to tell you. A bootable device means any sort of hardware that can read the files necessary for a computer start. These devices are CD-ROM, floppy disk, hard drive, DVD drive and USB thumb drive.

Fix No Boot Device Found in Windows 10

If your computer shows you a message “No Bootable Device found” then, there could be two possible causes i.e. The hard drive is not set as first boot device in BIOS and Corrupted MBR.

In first case, you are required to change boot order. Let’s see how:

  1. Restart your Windows laptop and then press Del key to enter BIOS screen just after the System gets start.
  2. Open the Boot tab using right arrow key on the keyboard.
  3. Now, using ‘+‘ or ‘‘ you need to select Hard Drive option.
  4. Once this is done, press F10 key to save the changes and restart computer.

If your computer was having hard drive related issue then above solution will fix this issue. However, if the problem is regarding corrupted MBR then you will have to adopt different method to overcome this predicament. 

Useful Tips:

  • Users can enter into the BIOS interface using F1, F2, F3, F3, Esc, or Delete key.
  • Every Operating System is different and so is the BIOS setup utility. Therefore, the menu option may vary by its name i.e. Boot, Boot Options, Boot Order, etc. Also, the boot order option may be present within a general menu option like Advanced BIOS Features, Advanced Options, or Other Options.

Let’s move to the second solution i.e. Corrupted MBR. Here, you will learn how to repair MBR by following given steps:

  • First, you will have to insert the Windows installation media into your System and boot from it.
  • Make a choice of a language and region, and then select “Repair your computer” on “Install Now” screen.
  • Now, when you have reached on Advanced Options screen, you need to select Troubleshoot and then Command Prompt. 
  • Enter the following command lines and hit Enter after each command. bootrec /fixmbr, bootrec /fixboot, bootrec /scanos, bootrec /rebuildbcd 
  • Once this is done, close the Command Prompt window and Restart your PC.

Once you are finished, check if the problem is solved. Make sure you follow every step and that too sequence wise. Well, this solution can be applied to Windows 7 also. Therefore, remember these two simple steps and be worry-free from such mess.

Updated: February 11, 2019 — 7:14 am

Leave a Reply

Your email address will not be published. Required fields are marked *